MAN铸造桥配件明细.pdf
MAN卡车车型系列资料-中国重汽-曼.pdf
DDE道依茨公司电控系统说明手册.pdf
Specification_and_simulation_of_statistical_query_algorithms_for_efficiency_and_noise_toler.pdf
Multiobjective_Optimization_in_Engineering_Design_Applications_to_Fluid_Power_Systems.pdf
Major Subject Mechanical Engineering DESIGN AND CONTROL OF A 6-DEGREE-OF-FREEDOM LEVITATED.pdf
Feature Based Architecture for Decision Fusion -Systems_Design_Engineering.pdf
Design_Optimization_of_Fuzzy_Logic_Systems.pdf
Design__Analysis__and_Semantics.pdf
Design of Multifunctional Body Panels in auto application 论文.pdf
An Adaptive Microarchitectural Model for System-level_Optimization.pdf
2012 Kobelev_Thin-walled rods with semi-open profile for semi-solid automotive suspension.pdf
日本汽车工业协会标准中文目录.pdf
hes标准培训讲稿(1小时).pdf
本田系图纸.png
本田系图纸识别.pdf
通用汽车最新标准_NSBS-C-2.0014_SEW_MoviFit选型.pdf
通用汽车-外来技术标准清单.doc
通用GMP标准目录.xlsx
GM9102P 腐蚀回向蠕变测试方法.doc
奇瑞标准_SQR.04.086-2006_内饰件油漆涂层.pdf
奇瑞标准_Q_SQR.04.694-2007_汽车塑料内饰件耐刮擦试验方法.pdf
奇瑞标准_Q_SQR.04.651-2007_注塑立柱护板总成技术条件.pdf
汽车防抱死制动系统设计论文.doc
汽车动力总成悬置系统NVH性能分析及改进设计 论文.pdf
汽车ABS性能检验的建模及半实物仿真.pdf
汽车ABS系统传导瞬态抗扰度性能研究.pdf
汽车ABS试验道路研究.pdf
汽车ABS电子控制单元综合性能测试试验台.pdf
汽车ABS电子控制单元的开发.pdf
汽车ABS侧向稳定性能道路试验评价系统研究.pdf
轿车减振器的设计 本科论文.pdf
基于直接反电动势法的无刷直流电机准确换相新方法.pdf
基于卡尔曼滤波算法的感应电机无速度传感器控制研究.pdf
基于道路试验的汽车滚动阻力和空气阻力系数计算方法研究.pdf
基于CAN总线的汽车液晶仪表设计.pdf
基于CAN总线的汽车ABS试验台测控系统研究.pdf
电性能测试 -微处理器工艺及其电性能测试技术.pdf
电性能测试 -CMT技术.pdf
差速器的设计论文.doc
毕设论文 微处理器工艺及其电性能测试技术.pdf
毕设论文 Configuration Module Test-CMT 电性能测试技术.pdf
RPS_定位点系统理论在车门上的应用 硕士论文.pdf
奇瑞标准_Q_SQR.04.134-2007_PC+ABS材料技术要求.pdf
奇瑞标准_Q_SQR.04.132-2007_ABS材料技术要求.pdf
奇瑞标准 QSQR.04.336—2004 电镀.pdf
奇瑞标准 QSQR.04.144—2010 方向盘.pdf
奇瑞标准 Q_SQR_04[1].739-2007_金属材料取样标准.doc
EPA_90_Subpt E.pdf
EPA_90_Subpt D.pdf
EPA letter CCD-01-01.pdf
CFR40-86B_1999.pdf
cfr40_94_locomotive.pdf
CFR_40_85 subpart E.pdf
40CFR86_2001_F.pdf
40CFR86_2001_E emission regulations.pdf
40CFR_sp_W_7_98 emission control performance test.pdf
40CFR_89-91_10_96_Nonroad vehicle.pdf
40CFR_85_SP_R_7_98 Exclusion and Exemption of motor vehicle.pdf
40CFR_85_7_98 control of air pollution from mobile.pdf
中华人民共和国汽车禁用物质要求 意见征求稿.pdf
中国汽车强制性标准及重要的推荐性标准目录 2012.xls
正面碰撞法规介绍.pdf
Steven_Tarnowsky-GM-2014_Chevrolet_Spark_EV_Propulsion_System.pdf
Sung-Hoon_Kim-Samsung_SDI-Different_Viewpoints_on_the_Battery_Technology_Limits.pdf
Thunes-NISSAN-HEV.pdf
Timothy_McGuire-Mercedes_Benz-Daimler_Fuel_Cell_OEM.pdf
Tom_Cackette-CARB-The_Need_for_Electric_Drive_Vehicles_to_Meet_Environmental_Standards.pdf
Tom_Watson-Johnson_Controls_Power_Solutions-Batteries-Still_the_Limiting_Factor.pdf
Zilai_Zhao-Magna_Electronics-HEV_Components_Cost_Reduction.pdf
主动悬架Electromechanical_Active_Suspension_Demonstration_for_Off-Road_Vehicles_SAE.pdf
什么是SAE.pdf
Sae-Mechanical_Engineering_Vehicle_Design Lecture Notes.pdf
SAE-Active_Front_Steering_Part_2.pdf
SAE-Active_Front_Steering_Part_1.pdf
SAE_2007-32-0070 Investigation on Cold Starting and Warming up 论文.pdf
SAE_2006-01-0424 Tier 2 Useful Life (120,000 miles) Exhaust Emission Results diesel.pdf
SAE Quantification of Pre-ignition in a Boosted SI Engine 2009-01-1795 论文.pdf
SAE MicroCoking Test An Accelerated Test Method 论文.pdf
SAE Beating the Noisy Offenders in vehicle transmission NVH.pdf
双向DCDC变换器在汽车双电压系统中的应用研究.pdf
轻型汽车前独立悬架设计分析 硕士论文.pdf
汽车前纵梁薄壁结构碰撞吸能特性及其优化的研究.pdf
长安汽车禁限用物质的限值及测量方法(欧盟).pdf
英国BS阻燃、防火测试标准.doc
世界汽车安全性技术法规与标准的研究.pdf
实施汽车强制性项目检验和定型试验规程的规范性要求.doc
汽车强制性标准内容简介.pdf
汽车强检.pdf
汽车海外法规认证策划.ppt
汽车产品禁用、限用物质要求.pdf
汽车产品禁用、限用物质细则2012版.pdf
汽车产品禁用、限用物质细则.pdf
汽车3C认证强检项目.xls
欧洲轮胎法规661、1222简介.pdf
欧洲法规及ELV指令和ROHS指令等相关知识培训.pdf
欧盟汽车型式认证概述.doc
欧盟汽车技术法规发展动态_2011.pdf
欧盟汽车产品市场准入和技术法规.pptx
欧盟轮胎标签法规1222-2009.docx
欧盟EN阻燃、防火测试标准.doc
欧盟1222_2009法规C1轮胎湿地抓着性能测试方法修改案.pdf
美国认证法规清单.doc
John_Schnoes-Nissan-Nissans_Commitment_to_Zero_Emission.pdf
John_Voelcker-High_Gear_Media-Electric_Vehicles-Understanding_the_Long-Term_Context.pdf
Kenji_Takahashi-Toyota_Motor_Corporation-Batteries_for_Electric_Powertrain_of_Toyota.pdf
Lance_Atkins-Nissan-Uncovering_the_Progress_on_Fuel_Cell_Electric_Vehicles.pdf
Matt_Laba-GM-Chevrolet_Volt_In-Use_Overview.pdf
Mazen_Hammoud-Ford-SAE_Hybrid_2013_Presentation.pdf
Menahem_Anderman-Adavanded_Automotive_Batteries_Battery_Performance_Roadmap.pdf
Menahem_Anderman-Advanced_Automotive_Batteries-Hybrid_Vehicle_Architecture_Proliferation_and_Market_Expansion.pdf
Mike_Tamor-Ford-Global_Vehicle_Usage_Studies.pdf
Oliver_Schmidt-Volkswagen-Volkswagens_Roadmap_of_Electrification_in_the_MQB.pdf
Paul_Bostock-Jaguar_Land_Rover-Plug-in_Hybridisation_for_Premium_Luxury_Vehicles.pdf
Pierre-Emmanuel_Strohl-Valeo-Plug-in_Hybrids_The_Market_Challenge_to_Meet_2025_Regulation.pdf
PT_Jones-ORNL-Predictive_Evaluation_of_EV_Performance_in_an_Urban_Taxi_Fleet.pdf
SAE 2010-01-1706 Development of Low Friction and Light Weight Wheel Hub Units to Reduce both the Brake Corner.pdf
SAE_2007-01-0633 A Study of Durability Problems and Solutions for Vehicle Hub Bearing.pdf
SAE_2010-01-0001 Automotive Structural Durability Design Using Dynamic Simulation and Fatigue Damage Sensitivity.pdf
SAE_paper_外文原文 Finite Element Analysis of Static Elastic.pdf
SAE_STANDARD_2010-01-1060-HVAC.pdf
SAE-516-2005 Hydraulic Hose Fittings.pdf
Shaw_Lynds-Maxwell-Ultracapacitors_for_Hybrid_and_Electric_Vehicles.pdf
美国电气安全法规的探讨与省思.pdf
轮胎标签_ECE法规.pdf
何谓EEC、ECE法规.pdf
各国法规介绍.doc
车辆emark认证法规清单.xlsx
巴西汽车技术法规目录.pdf
巴西车辆准入制度.pdf
TREAD_ACT(美国汽车安全法规).doc
TL_1010(中文版)_燃烧状态_材料技术要求.pdf
FMVSS302汽车内饰物燃烧测试.doc
FMVSS-214 OVSC LABORATORY TEST PROCEDURE 侧面碰撞.pdf
FMVSS_571.202a_Head_restraints_Mandatory_applicability_begins_2008.pdf
FMVSS_223后碰撞保护.pdf
FMVSS_220学童客车倾翻的防护.pdf
FMVSS_214侧碰撞保护.pdf
FMVSS_202头枕.pdf
FMVSS_201乘员在车内碰撞时的防护.pdf
FMVSS_135轿车制动系统.pdf
FMVSS_116 制动液.pdf
FMVSS.208 座椅.pdf
SAE_J2412_2004 accelerated exposure of auto interior trim using xeron are.pdf
SAE_J2521_03-26-05盘式片和鼓式片尖叫噪音矩阵.pdf
SAE_标准目录.pdf
SAE标准目录.pdf
Alex_Keros-GM-Lessons_from_GMs_Hydrogen_Fuel_Cell_Program.pdf
Alexander_Edwards-Strategic_Vision-Alternative_Powertrain_Customers.pdf
Alexandra_Cattelan-AVL-Vehicle_Electrification.pdf
Angus_Lyon-Drayson_Racing_Technologies-Accelerating_EV_Technology_Development_through_Motorsport.pdf
Barney_Carlson-INL-US_Department_of_Energy_Vehicle_Technologies_Program.pdf
Bob_Taenaka-Ford-Batteries-Still_the_Limiting_Factor.pdf
Cliff_Fietzek-BMW-BMW_Vehicle_Electrifications.pdf
Dan_Sperling-CARB-FCEVs_and_Hydrogen_in_California.pdf
Daniel_Zhang-Advanced_Electronics_Energy_Limited.pdf
David_Greene-ORNL-The_Future_of_Energy_and_the_Automobile.pdf
David_Patterson-Mitsubishi_Motors-Mitsubishi_Motors_Innovative_EV_Technologies_EV_PHEV_V2X_and_Motorsports.pdf
FORD hybrid.pdf
Greg_Moreland-US_DOE-Hybrid_Battery-Fuel_Cell_Systems_on_Heavy-Duty_and_Medium-Duty_Commercial_Vehicles.pdf
Jeffrey_Gonder-NREL-Evaluation_of_a_Lower-Energy_Energy_Storage_System_for_Full-Hybrid_Electric_Vehicles.pdf
Jeremy_Michalek-CM-Air_Emissions_and_Oil_Displacement_Benefits_from_Plug-in_Vehicles.pdf
Jesse_Schneider-BMW-J2954-Guideline_for_Wireless_Charging.pdf
ECE R19-2007 机动车前雾灯的统一规定(中英对照).pdf
CNCA-C11-05 强制性认证 - 机动车喇叭.pdf
2010年ECE汽车技术法规目录.doc
《汽车法规》课件5——汽车检验标准.ppt
《汽车法规》课件1——概论.ppt
外壳防护等级(IP代码)与测试条件对照表.xls
防护等级GB4208-2008.pdf
IP防护等级的意义.doc
IP防护等级标准.doc
GB4942.2-93低压电器外壳防护等级.doc
GB4208-2008-外壳防护等级(IP代码).doc
公司标准化培训.pdf
标准化知识培训教材.pdf
SAE_AMS_2700C-2008 Passivation of Corrosion Resistant Steels.pdf
SAE_AMS_4911L-2007 Titanium Alloy, Sheet, Strip, and Plate Annealed.pdf
SAE_AMS_4982D-2007 Titanium Alloy Wire.pdf
SAE_AMS_5510S-2008 Steel, Corrosion and Heat-Resistant, Sheet, Strip and Plate Solution Heat Treated.pdf
SAE_J_517-2010(E) Hydraulic Hose.pdf
SAE_J365-2004 Method of Testing Resistance to Scuffing of Trim Materials.pdf
SAE_J400-2002_石击试验标准.pdf
SAE_J434_中文版_用于汽车部件的球墨铸铁件.pdf
SAE_J434-2004 Automotive Ductile (Nodular) Iron Castings.pdf
SAE_J444-2005 Cast Shot and Grit Size Specifications for Peening and Cleaning.pdf
SAE_J514-2004 Hydraulic Tube Fittings.pdf
SAE_J517-2008 Hydraulic Hose 37P.pdf
SAE_J518-1993 HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, FOUR-BOLT SPLIT FLANGE TYPE.pdf
SAE_J1100-2002_汽车尺寸标准(中文版).pdf
SAE_J1383-2005 Performance Requirements for Replaceable Bulb Motor Vehicle Headlamps.pdf
SAE_J1453-2-2007_Specification_for_O-Ring_Face_Seal_Connectors_Part_2—Requirements__Dimensions__and.pdf
SAE_J1453-2002 Fitting—O-Ring Face Seal.pdf
SAE_J1885(中文版)_使用可控照射_水冷却氙弧设备.pdf
SAE_J2244-1_(port_with_o-ring_seal).pdf
SAE_J2412 Accelerated Exposure of Automotive Interior Trim Components.pdf
FMVSS 法规目录.pdf
EMC法规标准.pdf
E-mark与e-mark的认识与区别.doc
E-MARK 型式验证研习会.ppt
E-MARK 欧洲汽车及其零配件.pdf
EC指令_ECE法规.xls
ECE汽车技术中文标准法规目录.pdf
ECE汽车标准法规中文.pdf
ECE和EEC法规认证对照表.xls
ECE和EEC(EC)汽车技术法规介绍.doc
ECE法规目录列表(中英对照).doc
ECE_R77驻车灯法规摘要表.pdf
ECE_R53_车辆灯光及信号装置安装.pdf
ECE_R50机车灯光法规摘要表.pdf
ECE_R38_後雾灯法规摘要表.pdf
ECE_R37_灯泡法规摘要表.pdf
ECE_R37_灯泡.pdf
ECE_R13_第7版 braking.pdf
ECE_R13_第6版_第4次修订.pdf
ECE_R6_方向灯法规摘要表.pdf
ASME 美国机械标准中文版标准目录.doc
ASME 壁厚对照表.doc
ANSI_B92.1-1970_SAE 花键标准.pdf
ASTM_D256-2010 Determining the Izod Pendulum Impact Resistance of plastic.pdf
ASTM_D_955-08 收缩率测试(英文原版).pdf
ASTM_B类标准目录.doc
ASTM_B579-73(2004)_锡铅合金的电解沉积镀层(焊接板).pdf
ASTM_B338钛合金.pdf
ASTM_A653-Standard Test Method for steel sheet zinc coated 2001.pdf
ASTM_A536-1984(2004) 球墨铸铁件的标准规范.pdf
ASTM_A513-06b 电阻焊碳素钢与合金钢机械钢管.pdf
ASTM_A513-06a_电阻焊碳素钢与合金钢机械钢管.pdf
ASTM_A304-05(符合末端淬透性要求的碳素钢和合金钢棒材).pdf
ASTM_A193(2005)_高温用合金钢和不锈钢螺栓材料.pdf
ASTM_A_513-06b_电阻焊碳素钢与合金钢机械钢管标准规范.doc
ASTM(A255-02) 钢的淬透性试验方法.doc
ASTM 美国材料试验协会标准目录.docx
ASTM 各卷英文目录.xls
ASTM A182-A182M-2005 中文.pdf
ASME与国产材料对照表.doc
ASME_BPVC_IX Qualification Standard- Welding and Brazing_2010.pdf
ASME 压力容器标准培训制造要求.pdf
ASTM_E94 Standard Guide for Radiographic Examination 2004.pdf
ASTM_E8M 金属材料拉伸试验标准方法 2004.pdf
ASTM_E3 Standard Guide for Preparation of Metallographic Specimens.pdf
ASTM_E_428-08_超声检验用金属参考试块(铝除外)的制作与控制标准规程(英文).pdf
ASTM_E__ASTM 美国材料标准中英对照.doc
ASTM_D4541 09 Pull-Off Strength of Coatings Using Portable Adhesion tester.pdf
ASTM_D2240_Rubber Property—Durometer Hardness1 2005.pdf
ASTM_D2000 Rubber Products in Automotive Applications 2008.pdf
ASTM_D1525 07_塑料维卡(Vicat)软化温度的测试方法.pdf
ASTM_D790-2010 Flexural Properties of Unreinforced and Reinforced Plastics.pdf
ASTM_D790-2003_未增强和增强塑料及电绝缘材料弯曲性的标准试验方法_中文版.pdf
ASTM_D695-2010 Compressive Properties of Rigid Plastics.pdf
ASTM_D648_Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position 2004.pdf
ASTM_D638-2010 Tensile Properties of Plastics.pdf
ASTM_D638 2003 热塑性的塑胶拉伸测试(英文原版).pdf
ASTM_D624_Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers.pdf
ASTM_D573-Rubber—Standard Test Method for Deterioration in an Air Oven.pdf
ASTM_D570_2005-吸水率测试.pdf
ASTM_D471橡胶性能的标准试验方法-液体影响(中文版).doc
ASTM_D395_Rubber Property—Compression Set.pdf
DIN 125平垫圈.doc
DIN 125_不锈钢平垫_垫片_标准__冲床压力计算.xls
DIN 125_9021_法标_美标_日标.xls
DIN 125 product grade A washer.pdf
BS_EN_1011 铁素体钢的电弧焊.doc
美国ASME标准目录.doc
美国_ASTM_标准目录查询.pdf
ASTM中英文对照目录大全.pdf
ASTM美国材料标准中文版.doc
ASTM标准_E1012.7744-1 Tensile and Compressive Axial Force Application1.pdf
ASTM-G154 快速紫外老化测试.pdf
ASTM-B117 盐雾测试标准(英文原版).pdf
ASTMA513-00(2000)电阻焊碳钢与合金钢机械用钢管.pdf
ASTM-A439 奥氏体球墨铸铁铸件-中文版.pdf
ASTM+D412 硫化橡胶和热塑性弹性体拉伸试验方法.doc
ASTM_G155-2005 塑料 户外氙灯老化试验方法.pdf
ASTM_E446 Steel Castings Thickness.pdf
ASTM_E308 Standard Test Method for Computing the Colors of Objects by Using the CIE System 2001.pdf
ASTM_E112 金属平均晶粒度测定方法 中文.doc
ASTM_E112 Standard Test Methods for Determining Average Grain Size 2004.pdf
DIN_332-1-1986中心孔.pdf
DIN_76-2_1984_12_EN 管螺纹标准.pdf
DIN__ISO_8733_en hard steel.pdf
DIN__ISO_8673_en fine pitch thread.pdf
DIN__ISO_4032_en hexagon nuts.pdf
DIN__ISO_2341 with head.pdf
DIN__ISO_2340 clevis pins without head.pdf
DIN 75200(中文版)燃烧性.pdf
DIN 53504橡胶弹性体试验_中文版.pdf
DIN 53479 塑料和弹性体密度测试.pdf
DIN 45635-1-1984 机器噪音测量.pdf
DIN 17230-1980_高碳铬轴承钢.pdf
DIN 9021-90 large size washers.pdf
DIN 3961 tolerance for cylindrical gear teeth.pdf
DIN 914 hexagon socket set screw.pdf
DIN 912-83 hexagon socket head cap screw.pdf
DIN 603-81 mushroom head square neck bolt.pdf
DIN 332-2 center holes with threads for shaft ends.pdf
DIN 127_弹垫.pdf
DIN 127 Helical spring lock washers, spring steel.pdf
DIN_4102 for the proof of fire behaviour 报告.pdf
DIN_3865-2002 O-ring.pdf
DIN_3771-4 O-RING.pdf
DIN_3771.1-1984 O-RING.pdf
DIN_2393[1].2 具有特殊尺寸精度的焊接精密钢管.doc
DIN_2353-1998 compression and fittings coupling.pdf
DIN_1771_铝及铝合金角型材.pdf
DIN_1654-4 调质刚供货技术条件.pdf
DIN_1654-3 渗碳钢供货技术条件 冷顶锻冷挤压用钢.pdf
DIN_1654-2_冷顶锻冷挤压钢供货技术条件.pdf
DIN_1654-1_冷顶锻冷挤压钢供货技术条件.pdf
DIN_1623-2_冷轧钢板钢带供货技术条件.pdf
DIN_1623-2 cold reduced sheet and strip technical delivery condition.pdf
DIN_916-1980_内六角凹端紧定螺丝.pdf
DIN_867-1986 basic rack tooth profile.pdf
DIN_867_齿轮标准.doc
DIN_616-2000_滚动轴承.尺寸.一般方案.pdf
DIN_616 rolling bearing.pdf
DIN_603 mushroom head square neck bolt.pdf
DIN_332-2-83 中心孔螺纹.pdf
DIN_75220-1992 汽车零部件在阳光模拟装置中的老化 中文版.pdf
DIN_75201-1992 道路汽车内挡风玻璃的雾气凝结性能的测定.pdf
DIN_75200 内饰材料燃烧特性 English.pdf
DIN_72551 低压电缆.pdf
DIN_72551 低压电缆.doc
DIN_58400-1984 德语 齿轮.pdf
DIN_55928 金属材料构件通过涂层和衬里来防腐.doc
DIN_53421-1984 硬质泡沫塑料压力试验 中文版 .pdf
DIN_50961镀锌.doc
DIN_50150-2000 testing of metallic material -hardness conversion .pdf
DIN_30910-4 material for structural parts.pdf
DIN_18800-1(中文)钢架结构-第一部分.pdf
DIN_17200_调质钢材的供货技术条件.pdf
DIN_15018-1 cranes steel structure verification and analysis .pdf
DIN_6885-1 轴销公差带.pdf
DIN_5417-1976__滚动轴承用紧固零件.带环槽轴承用挡圈.pdf
DIN_5402-3-1993_滚动轴承_滚动轴承零件_滚针.pdf
DIN_5401-2002 balls for rolling bearing.pdf
DIN_4766-1 Herstellverfahren der Rauheit von Oberfl?chen.pdf
DIN_4102 地面材料临界热辐射量测试.doc
ISO4957-2001工具钢.pdf
ISO3834-2 金属材料熔化焊的质量要求培训.ppt
ISO3834-1 金属材料熔化焊的质量要求.pdf
ISO_8504-2_2000 Abrasive blast-cleaning.pdf
ISO_3888-2-2002_BS 双移线 test track for a severe lane change-obstacle avoidanc_en.pdf
ISO_3834.5.2005 金属材料熔化焊的焊接质量要求.pdf
ISO 106750-2 road vehicle-environmetal conditions for electrical loads test equipments.pdf
ISO DIS 14230 Road Vehicles - Diagnostic Systems KWP2000协议.pdf
德国工业标准_DIN 材料.doc
德国标准目录-DIN.doc
德国标准DIN目录.xls
德国DIN标准目录清单.doc
EN12329-中文 铁或钢的镀锌及辅助热处理.doc
EN_10139-1997_中文版_冷成型用冷轧未涂覆软钢窄带材_交货技术条件.pdf
EN_573-3铝和铝合金化学成分.doc
DIN与ISO对照表.xls
DIN德国管件标准.pdf
DIN标准中文版.xls
DIN标准紧固件与GB对照.xls
DINEN_10139 用以冷加工软钢制无镀层窄带材.doc
DINEN_10130 用于冷加工的由软钢制冷轧扁平产品.doc
DIN_ISO_GB标准对照表.doc
DIN_ISO_8752_en spring type.pdf
DIN_EN10263_4 tech conditions for steel for tempering and quenching.pdf
DIN_EN_ISO_8434-1_2008 metallic tube.pdf
DIN_EN_ISO_5817_(DE).pdf
DIN_EN_ISO_4624-2003色漆和清漆.粘附力拉脱试验.pdf
DIN_EN_ISO_1302-2002 indication of surface texture.pdf
DIN_EN_60715-2001 Dimensions of low-voltage switchgear and controlgear.pdf
DIN_EN_60534-3-3-2000_工业过程控制阀.第3-3部分尺寸.对头焊接的对头尺寸_两种方式_球型_直角型控制阀门.pdf
DIN_EN_60534-3-1-2000_工业过程控制阀.第3-1部分尺寸.双通球型直立式控制法兰阀门的面对面尺寸和双通球型.pdf
DIN_EN_24014_1992 hexagon head bolt.pdf
DIN_EN_13913—2003 橡胶悬挂元件.pdf
DIN_EN_12680-1_2003_EN Steel castings for general purposes.pdf
DIN_EN_12385-4-2003 spec ropes for general lifting application.pdf
DIN_EN_12329-2000_金属的防腐蚀保护(中文).pdf
DIN_EN_12164-2000_铜及铜合金_快削加工用杆材.pdf
DIN_EN_10270-1 cold drawn unalloyed spring steel wire.pdf
DIN_EN_10263-3 case hardening steel.pdf
DIN_EN_10253-4-2003 spring steel.pdf
DIN_EN_10132-4_spring steel EN.pdf
DIN_EN_10132-4 spring steels 德语.pdf
DIN_EN_10132-3 steels for quenching and tempering.pdf
DIN_EN_10132-2 case hardening steel 德语.pdf
DIN_EN_10132-1 cold rolled narrow steel strip for heat treatment 德语 .pdf
DIN_EN_1982-1998_铜及铜合金-纯锭铸造.pdf
DIN_EN_1706-1998_中文版_铝和铝合金_铸件_化学成分和机械性能.pdf
DIN_EN_1092-1-2008__法兰及其连接件.PN标注的管道、阀门、配件和附件用圆形法兰.第1部分钢制法兰.pdf
DIN_EN_1011-4_2000铝及铝合金弧焊.doc
DIN_EN_1011-3-2001_焊接金属材料的建议-不锈钢的弧焊.doc
DIN_EN_755-2_英文版 铝合金-拉伸管棒_第2部分:机械特性.pdf
DIN_EN_755-2_铝合金挤压棒、型、带机械性能.pdf
DIN_EN_755-1_铝合金挤压棒、型、带供货技术条件.pdf
DIN_EN_575_铝和铝合金_通过熔炼制成的中间合金技术条件_EN5751995.pdf
DIN_EN_573-4_铝合金化学成分和半成品的样式.pdf
DIN_EN_573-3 Chemical composition.pdf
DIN_EN_573_Aluminium Chemische Zusammensetzung.pdf
DIN_EN_485-4 薄铝板冷轧产品极限尺寸形状公差.pdf
DIN_EN_485-3 Tolerances on dimensions and form for hot-rolled products.pdf
DIN_EN_485-2 铝和铝合金薄板、带和板材的机械性能.doc
SAE 标准名称列表-(美国机动车工程师学会).pdf
SAE J4004-2008 Positioning the H-Point DesignTool-Seating Reference Point and Seat Track Length.pdf