热门搜索:

  • /?8
  • 下载费用:15 金币 ?

Minimum-Automotive-Quality-Management-System-Requirements-for-Sub-tier-suppliers V2.pdf

关?键?词:
MINIMUM AUTOMOTIVE QUALITY MANAGEMENT SYSTEM REQUIREMENTS FOR SUB TIER SUPPLIERS V2
资源描述:
AUTOMOTIVE MAQMSR QUALITY MANAGEMENT SYSTEM DOCUMENT Second Edition September, 2017 Minimum Automotive Quality Management System Requirements for Sub-Tier Suppliers Sections of IATF 16949 selected for supplier QMS development International Automotive Task Force? AIAG, ? ANFIA, ? FIEV, ? SMMT, ? VDA – 2016 – All rights reserved IATF copyright notice This Automotive Quality Management System Document, known as MAQMSR, is copyright protected by the members of the International Automotive Task Force (IATF). Permission is granted for organizations certified to ISO/TS 16949:2009 or IATF 16949:2016 to reproduce this document in its entirety for distribution to their suppliers for the expressed purpose of aiding development of their quality management system in accordance with ISO/TS 16949:2009 Section 7.4.1.2 or IATF 16949:2016 Section 8.4.2.3. Otherwise, except as permitted under the applicable laws of the user's country, neither this Automotive Quality Management System Document nor any extract from it may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission being secured from the IATF. Reproduction may be subject to royalty payments or a licensing agreement and violators are subject to legal prosecution. Requests for permission to reproduce and/or translate any part of this Automotive QMS Document should be addressed to one of the following national automotive trade associations below: Associazione Nazionale Filiera Industrie Automobilistiche (ANFIA / Italy) Automotive Industry Action Group (AIAG / USA) Fédération des Industries des équipements pour Véhicules (FIEV / France) Society of Motor Manufacturers and Traders Ltd. (SMMT / UK) Verband der Automobilindustrie e.V. (VDA / Germany)? AIAG, ? ANFIA, ? FIEV, ? SMMT, ? VDA – 2016 – All rights reserved TABLES OF AUTOMOTIVE QMS REQUIREMENTS 1 CONTROL PLANS................................................................................................................................... 2 2 PROCESS APPROACH .......................................................................................................................... 2 3 PERFORMANCE ..................................................................................................................................... 2 4 INTERNAL AUDITING............................................................................................................................. 3 5 CONTROL OF NON-CONFORMING PRODUCT ................................................................................... 3 6 PART APPROVAL................................................................................................................................... 3 7 MANAGEMENT RESPONSIBILITY ........................................................................................................ 4 8 RISK MANAGEMENT.............................................................................................................................. 4 9 SAFETY.................................................................................................................................................... 4 ANNEXES ................................................................................................................................................... 4* Requirement is new for IATF 16949 ? AIAG, ? ANFIA, ? FIEV, ? SMMT, ? VDA – 2016 – All rights reserved 2 TABLE 1 - CONTROL PLANS Automotive QMS Requirement Applicable IATF 16949:2016 Section(s) 1.1 Control plan 8.5.1.1 Control plan 1.2 Work instructions 8.5.1.2 Standardized work – operator instructions and visual standards 1.3 Verification of job set-ups 8.5.1.3 Verification of job set-ups 1.4 Preventive maintenance 8.5.1.5 Total productive maintenance 1.5 Identification and Traceability 8.5.2 Identification and traceability 8.5.2.1 Identification and traceability — supplemental 1.6 Verification after shutdown * 8.5.1.4 Verification after shutdown * 1.7 Temporary change of process controls * 8.5.6.1.1 Temporary change of process controls * TABLE 2 - PROCESS APPROACH Automotive QMS Requirement Applicable Criteria 2.1 Process application The organization shall define its product realization system. Each process and sub- process shall be defined. Each defined process shall be implemented and controlled including the interactions and linkages between processes. The processes shall be monitored for effectiveness. Note – Suppliers may refer to ISO 9001:2015 Section 0.3 for further guidance on the process approach. TABLE 3 - PERFORMANCE Automotive QMS Requirement Applicable IATF 16949:2016 Section(s) 3.1 Customer satisfaction 9.1.2.1 Customer satisfaction – supplemental 3.2 Incoming product conformity to requirements 8.6.4 Verification and acceptance of conformity of externally provided products and services 3.3 Supplier monitoring 8.4.2.4 Supplier monitoring 3.4 Problem solving and root cause analysis 10.2.3 Problem solving 10.2.4 Error-proofing * 10.2.5 Warranty management systems * 10.2.6 Customer complaints and field failure test analysis ** Requirement is new for IATF 16949 3 ? AIAG, ? ANFIA, ? FIEV, ? SMMT, ? VDA – 2016 – All rights reserved TABLE 4 – INTERNAL AUDITING Automotive QMS Requirement Applicable IATF 16949:2016 Section(s) 4.1 Quality management system audit 9.2.2.2 Quality management system audit – except: organization shall audit to verify compliance with MAQMSR, 2 nd Ed. 4.2 Manufacturing process audit 9.2.2.3 Manufacturing process audit 4.3 Product audit 9.2.2.4 Product audit 4.4 Internal audit plans 9.2.2.1 Internal audit programme 4.5 Internal auditor qualification 7.2.3 Internal auditor competency, except: ? requirement for documented process may be waived if audits are conducted under the guidance of a qualified customer second- party auditor ? scope of auditor competency limited to ISO 9001:2015 and MAQMSR TABLE 5 - CONTROL OF NON-CONFORMING PRODUCT Automotive QMS Requirement Applicable IATF 16949:2016 Section(s) 5.1 Control of nonconforming product 8.7.1.2 Control of nonconforming product – customer specified process* 8.7.1.3 Control of suspect product 5.2 Control of reworked product 8.7.1.4 Control of reworked product 8.7.1.5 Control of repaired product* 5.3 Customer information 8.7.1.6 Customer notification 5.4 Customer waiver 8.7.1.1 Customer authorization for concession TABLE 6 – PART APPROVAL Automotive QMS Requirement Applicable IATF 16949:2016 Section(s) 6.1 Product approval process 8.3.4.4 Product approval process 6.2 Engineering specifications 7.5.3.2.2 Engineering specifications 8.4.2.2 Statutory and regulatory requirements* 8.4.2.3.1 Automotive product-related software or automotive products with embedded software* 6.3 Monitoring and measurement of manufacturing processes 9.1.1.1 Monitoring and measurement of manufacturing processes 6.4 Measurement system analysis 7.1.5.1.1 Measurement system analysis 6.5 Calibration/verification records 7.1.5.2.1 Calibration/verification records 6.6 Change control and change control notification 8.5.6.1 Control of changes - supplemental* Requirement is new for IATF 16949 ? AIAG, ? ANFIA, ? FIEV, ? SMMT, ? VDA – 2016 – All rights reserved 4 TABLE 7 – MANAGEMENT RESPONSIBILITY Automotive QMS Requirement Applicable IATF 16949:2016 Section(s) 7.1 Process monitoring 5.1.1.2 Process effectiveness and efficiency 7.2 Quality objectives 6.2.1 and 6.2.2 (ISO 9001:2015) 6.2.2.1 Quality objectives and planning to achieve them – supplemental 7.3 Responsibility for quality 5.3.2 Responsibility and authority for product requirements and corrective actions 7.4 Customer representative 5.3.1 Organizational roles, responsibilities, and authorities – supplemental 7.5 Quality management system performance 9.3.1.1 Management review – supplemental 7.6 Management review inputs* 9.3.2.1 Management review inputs – supplemental 7.7 Management review outputs* 9.3.3.1 Management review outputs – supplemental 7.8 Corporate responsibility* 5.1.1.1 Corporate responsibility* TABLE 8 – RISK MANAGEMENT Automotive QMS Requirement Applicable IATF 16949:2016 Section(s) 8.1 Risk Management* 6.1.2.1 Risk analysis* 6.1.2.2 Preventative action* 8.2 Contingency plans 6.1.2.3 Contingency plans TABLE 9 – SAFETY Automotive QMS Requirement Applicable IATF 16949:2016 Section(s) Product Safety* 4.4.1.2 Product safety* ANNEXES Automotive QMS Requirement Applicable IATF 16949:2016 Section(s) (normative) Annex A: Control Plan (informative)* Annex B: Bibliography – supplemental automotive*
? 汽车智库所有资源均是用户自行上传分享,仅供网友学习交流,未经上传用户书面授权,请勿作他用。
0条评论

还可以输入200字符

暂无评论,赶快抢占沙发吧。

关于本文
本文标题:Minimum-Automotive-Quality-Management-System-Requirements-for-Sub-tier-suppliers V2.pdf
链接地址:http://www.autoekb.com/p-9393.html
关于我们 - 网站声明 - 网站地图 - 资源地图 - 友情链接 - 网站客服客服 - 联系我们

copyright@ 2008-2018 mywenku网站版权所有
经营许可证编号:京ICP备12026657号-3?

收起
展开